The hills are golden this time of the year, and while that means the wildflowers are gone too, it doesn't mean there are no scenes left to photograph.
The hills turn an ethereal pink just after the Sun sets behind the mountains. This photo shows the Sun about 30 seconds before it disappeared into the coastal hills.
You may have noticed that on some bicycles, the edges of the lugs are attractively outlined in gold or in a contrasting colour. This treatment is called "pinstriping" and is done by hand after the bicycle's frame is painted. I like the look very much and decided to try it on my Raleigh Lady's Sport, in preparation for a more serious project. I was nervous, but it turned out to be easier than I expected. If you want to give it a try yourself, here is how:
To go the truly professional route, you will need enamel paint and a pinstriping brush in the smallest size available. Having said that, I do not think these tools are necessary unless you are an experienced professional and are pinstriping a $3,000 frame with super-intricate lugwork. The enamel method can be difficult and messy, plus enamel paint contains led. Instead, I recommend a paint pen. Even professionals use these for simple projects. Several manufacturers make quality paint pens that are suitable for pinstriping bicycle frames, including Sharpie and DecoColor. Make sure the paint pen is oil-based. The label should explicitly state that it will leave permanent marks on metal surfaces. The size should be "extra fine". The price is usually in the $2.00 - $4.00 USD range.
The paint pen needs to be started by pressing down on the nib and pumping it several times - something best done on a piece of paper. When the paint flows through the pen slowly and evenly, you can begin.
Before starting the process, it is a good idea to clean the edges around the lugs and wipe them dry. Otherwise, your paint pen may get clogged with dust and grime. Once the area is prepared, simply begin to trace around the lugs with the paint pen, at a slow and even pace.
If the pen skips over a spot, go back and carefully re-trace that spot. If your hand shakes and you make an uneven line, or if the paint smears, wipe it off quickly with your fingertip or fingernail before it dries.
Once the paint dries, the marks you have made will be water resistant. If you notice a mistake after that happens, you can still get rid of it by carefully scraping the paint marks off with an exacto knife or a razor blade.
One issue you might encounter with rougher lugwork, is jagged edges. The lugs on my Raleigh Lady's Sports are quite crudely finished, and as you can see above, it can be difficult to make smooth outlines when the edge itself is crooked. But don't worry about that too much; these little details aren't noticeable unless you really examine the lugs up close. And I can assure you that the pinstriping on standard production vintage bikes is just as messy: Whoever outlined the lugs on my Motobecane at the factory did a sloppier job than my DIY.
So really, don't be afraid to go for it. If you have an old bicycle you'd like to spruce up, pick up a paint pen and give it some nice lug accents.
Took all of 10 minutes. One of the advantages of living in small-town America! And in Indiana. Now, if only the irritating political ads (on both sides) and the very annoying phone calls would stop!!! The ladies at the polling place said there has been a good turnout for in-person voting. I was number 1,136. That doesn't sound like much but there's only about 20,000 registered voters in Noble County. They have also gotten "a lot" of mail-in absentee ballots too. Like everywhere else in the nation they are expecting a record turn-out. It's been pretty amazing to see all of the attention that Indiana has gotten from both parties. For the first time since I started voting, I feel like my vote will actually mean something. 'Bout time.
Okay, I promise not to make this another post with deep thoughts inspired by the snowpocalyptic weather in Boston. Because at this point, my bikes have reached a state that clinicians like to call "learned helplessness": The individual, convinced that no action on their part can alter their fate, just gives up and stops trying, possibly curling up in the fetal position and gently rocking back and forth. The snow won, dear readers.Oh yes, it won.
Yesterday, this was "the road" outside my house. Perhaps not surprisingly, last night I had a dream about this fellow. Though I am normally drawn neither to Surly nor to mountain bikes, I've had the hots for the Surly Pugsley since the first time I saw one a couple of years ago. I have no intention of getting one, honest. But part of me wishes I still lived in Northern NH, so that I'd "have no choice but to get it," you understand. I have seen pictures of that bicycle ridden through waist-deep snow, through soft sand, and crossing medium sized lakes. And something about the proportions seems just right to me, making the Pugsley an "ugly, in a handsome kind of way" type of bike. The Joe Viterelli of bikes, if you will.
There is no doubt that my massively heavy, long wheelbase, 38mm tire Gazelle handles better when going over snow than the lighter and sprightlier 35mm tire Bella Ciao. But neither of them is sufficient when things get really bad. And oddly, on the worse days I actually find myself favouring the Bella Ciao, only because its easier to wield when acrossing enormous snowbanks. Poor bike, I look forward to seeing what the chain will look like under that nearly-but-not-quite-full chaincase after the winter is over...
If anybody out there is riding on streets that look like this, what bike are you riding and how is it working out for you? And if you say "skinny tires," I want pictures! As for me, I stayed indoors all day today - drinking tea, catching up on work, and daydreaming of crossing frozen rivers on a white Pugsley.
This bicycle was built up using a custom Gerhard Marshall frame (originally made for Velorbis), with Sogreni, Brooks and Nitto components. I take it the frame is either chromed or stainless steel, but I cannot recall which. If anyone has any info on Gerhard Marshall frames, I would love to hear it; cannot seem to find anything about them.
Here is a view that shows off the fenders and handlebars better. The fenders are Sogreni, but were altered to fit the frame and tires.
Sogreni chainguard.
Copper and leather - mmmmmm...
Braided bar tape, inverse brake levers, brass bell.
Yesterday's blizzard delivered even heavier snowfall than the first one we had, but our neighbourhood was a lot more functional and lively this time.
The Co-Habitant cycled to work as usual, but I set off on foot. Upon reaching the main road, I was surprised to see many other pedestrians trekking along it. There are some small grocery stores and restaurants along this street, so the trekkers must have been heading to and from these establishments.
This particular place of business was especially popular!
Lots of bikes buried in the snow, but I saw only two on the roads.
Mountain bikes are useful in these conditions - though the Co-Habitant says his Pashley handled fine as well. Apparently people photographed and videotaped him as he cycled to work.
Given the conditions outdoors, I was truly impressed with the relative normality of everything.Many businesses and institutions were open, people were out and about, and fewer things were cancelled than last time.In the morning, the electricity went out on our street for a few minutes, but then came right back on. And the lock on the outside door was frozen when I came home, so I had to work on it for a while before I could fit the key in. But other than that, we had no blizzard-related disturbances.
It is fascinating to me, that after only a few weeks of heavy snowfall my neighbourhood has already adapted to the new circumstances and normalised them - human beings are resilient! The atmosphere felt relaxed and not at all apocalyptic; it was a functional blizzard. And if this sort of thing continues, I will have to reconsider snow tires: Even the plowed parts of the roads were covered with at least a thin layer of snow. Turning the bike lanes into ski lanes would also work for me, but somehow I don't see that happening quite yet.
